- Home
- Equipment
Refine by
B And P Environmental Equipment & Supplies
16 equipment items found
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
B&P’s Podbielniak® Contactor (POD®) is a horizontal liquid liquid centrifugal extractor that processes liquids for accelerated solvent extraction. The two main functions of this machine are liquid liquid separation (must have specific gravity difference of .01 or greater) and the liquid-liquid extraction process through counter-current flow. This separation technology is often ...
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
Liquid-Liquid Extraction, or liquid liquid separation, is the removal of a soluble constituent from one liquid by means of transferring it to ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water Technologies has a relevant expertise in the field of mbbr sewage treatment plant, whatever the pollutant present in the water is, even with high COD (Chemical Oxygen Demand) levels. The moving bed biofilm reactor (mbbr) implies a process to purify wastewater not so different from an activated sludge system. The process is suitable for organic removal, nitrification, denitrification ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water Technologies has a deep experience in supplying customized solutions for the industrial and civil water softening, filtration, iron removal and sterilization, for water flow rates in a range of 1-300 m3/h. Softening can be achieved by means of water softeners filled with resins (FDA approved). Softeners can be supplied both in single and duplex configuration, with timer/volume based ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water Technologies manufactures a comprehensive range of skid mounted or containerised reverse osmosis desalination ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
CPI Packages are commonly used to separate oil and fats with low specific gravity. The water flows through corrugated plates (also defined as "coalescing plates") manufactured in polypropylene. Prefabricated units in steel can be provided for flows up to 500 m3-hour. Oil and fats particles adhere to the plates and, due to low density, move upward. A skimming device collects the oil/fats from ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
Our packaged units for sewage water treatment are based on the traditional activated sludge process with extended aeration or on the newest and "state of the art" technology of membrane bioreactor (the so called MBR). The packaged activated sludge biological treatment plant represents the best solution for single users or small communities. The compact construction allows the installation in ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water Technologies manufactures a comprehensive range of "containerised" of biological wastewater treatment plants based on MBR technology. When used with domestic wastewater, MBR processes produce effluent of high quality enough to be discharged to coastal, surface or brackish waterways or to be reclaimed for urban irrigation. It is possible to operate MBR process at higher mixed liquor ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
Being equipped with all the standard features (5 micron cartridge filters, high rejection membranes, high pressure duplex stainless steel pump), our mobile water purification units can be adapted to specific needs with a set of options, such as: chemical conditioning systems; UF pre-treatment; energy recovery with pressure exchangers; configuration for hazardous areas. Solar power ...
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
B&P Littleford's Liquid Solid Separation Centrifuges are known for relentless productivity in the separation of coarse solids from free-draining crystalline slurries. The products flow in a gentle, single-stage, handling and washing as they are transported through the basket. Our specialists design and construct the Pusher for standard products, but can also customize it in cooperation with ...
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
In Liquid Solid Separation, or Liquid-Solid Extraction, a solvent (hydrophilic or hydrophobic, acidic, neutral or basic) is added to a solid forming a slurry. Insoluble material can be separated by gravity or vacuum filtration, and soluble material is "extracted" into the solvent. A sequence of solvents, of varying polarity or pH, can be used to separate complex mixtures into ...
Manufactured by:B&P Littleford based inSaginaw, MICHIGAN (USA)
B&P Littleford’s TriVolution® Compounder is a very distinct mixing machine that reciprocates the process screw 3 times for every 1 revolution. The flights interact with pins in the barrel much in the same way a continuous kneader ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water technologies designs and manufactures a wide range of skid-mounted packaged chemical-physical plants. These packages are designed to treat the residual water containing compounds as non-biodegradable pollutants, inert mineral substances, organic substances, mineral oil, paints, solvents, residual suspended solids, ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
A vacuum sewer system uses the differential pressure between atmospheric pressure and a partial vacuum maintained in the piping network and vacuum station collection vessel. This differential pressure allows a central vacuum station to collect the wastewater of several thousand individual homes, depending on terrain and the local situation. Vacuum sewers take advantage of available natural slope ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
Our brackish reverse osmosis packages are designed to treat well waters and ground waters having a maximum salinity of 10000 ppm up to 6000m3/day of product water and to satisfy any specific requirement of the end user/customer regarding the required quality of produced ...
Manufactured by:B&P Water Technologies s.r.l. based inRome, ITALY
B&P Water Technologies designs and manufactures chemical injection dosing packages for petrochemical applications and water treatment purposes (boiler conditioning, process waters, waste ...